Spectrum PA6 Neat BK Schwarz 1.75mm 750g

High temperature polyamide

Filament Spectrum PA6 Neat BK is made with LUVOCOM 3F PAHT® 9936 BK. The quality of the filament was entirely checked and is certified by Lehmann&Voss&Co KG.

Filament Spectrum PA6 Neat BK (made with LUVOCOM 3F PAHT® 9936 BK) is a new, high-temperature PA6-based construction material in black colour. A major feature of the PA6 Neat is its increased mechanical strength as compared to other plastics. The material also features exceptional thermal properties, chemical resistance to oils and lubricants, relatively high resistance to corrosion stimulators and good electrical insulation properties as compared to unmodified PA6 or PA66.

Parts made of Spectrum PA6 Neat BK (made with LUVOCOM 3F PAHT® 9936 BK) allow for long-term operation at elevated temperatures up to 120°C (20.000h) and up to 160°C for a short-time operation (max. 200h), while maintaining sufficient mechanical properties. Filament PA6 Neat is characterized by a low linear processing shrinkage (0.3%) and a reduced water absorption (<0.3%, 23 ° C / 24h). The above features make it an excellent filament for a professional user to make solid prints.

To attain the very attractive properties of PA6 Neat BK (made with LUVOCOM 3F PAHT® 9936 BK), as regards the technical aspects, you need to follow the basic storage rules for such materials (in a dry and dark place with humidity below 15%). To obtain the best parameters of the printed object possible, it is recommended to dry the material prior to work. 

Material characteristics:

• low linear processing shrinkage (0.3%)
• high temperature up to 160°C for short-time operation (max. 200h)
• high temperature up to 120°C for long-time operation (20.000h)
• heat distortion temperature ? HDT A 90°C (ISO 75)
• water absorption below 0.3% (23°C / 24h)
• high creep resistance
• good tribological properties, including dry friction conditions such as in slide bearing
• chemical resistance to lubricants and oils

Applications:

• production of gear wheels and racks, slide bearings, sweep-off gears and guide rolls operated in elevated temperatures up to 120°C on a prolonged basis and up to 160°C on a short-time basis
• all types of ring and plate seals with an increased chemical and corrosion resistance
• end-use parts
• tooling
• functional prototyping
• industrial modelling

VERIFY YOUR SPOOL - das präziseste Qualitätskontrollsystem auf dem Markt

Filamente für 3D-Drucker werden nach der Methode der freien Extrusion hergestellt, die aufgrund des besonders großen Einflusses der Prozessparameter auf die Produktabmessungen und die Materialhomogenisierung eine der schwierigsten Verarbeitungstechniken durch Extrusion ist.

Während der Produktion wird jeder 1 mm des Spectrum-Filaments kontinuierlich in 2 Achsen mit einer Genauigkeit von ±0,8 µm gemessen, wodurch ein hochwertiges Endprodukt erzielt werden kann. Um dies zu beweisen, hat Spectrum Filaments als einer der wenigen Hersteller weltweit die Möglichkeit der Online-Präsentation eingeführt, individuell für jede hergestellte Spule:

• Durchmesserverlauf über die gesamte Spulenlänge,
• mittlerer Durchmesser,
• Ovalität,
• Standardabweichung.

Eine genaue Untersuchung garantiert, dass die Produkte von Spectrum Filaments die strengen Marktanforderungen erfüllen.